If you’re thinking about converting your outdated bathtub into the luxurious walk-in shower you’ve always dreamed of, you’re in good company. According to the American Institute of Architects, bathrooms without bathtubs are growing in popularity. In fact, 60 percent of homeowners preferred stall showers to tubs in a 2013 survey. However, there’s a caveat: most real estate agents recommend keeping at least one bathtub in your home to preserve its marketability when you decide to sell your home. So, before you take a sledgehammer to your bathtub, here are some tips for making the process as seamless and affordable as possible.
Measure the Space
Not all showers will fit in the space that’s being occupied by your bathtub, which is why it’s important to measure your bathroom as precisely as possible. Most tubs are 60 inches wide, which is a great width for a shower. Unfortunately, many homeowners typically run into an issue with the depth. You’ll want to aim for at least 32 to 34 inches from the finished tile wall to the future glass shower door. To comply with the National Kitchen & Bath Association’s guidelines for bathrooms, you’ll also need to have a finished ceiling height of a minimum of 80 inches and a shower that’s at least 30 X 30 to comply. It’s also important to record the toilet location- a distance of 15 to 18 inches from the center of the toilet to the shower door tends to be comfortable.
If the measurements of your future shower don’t fall in line, you’ll likely need to put your shower in a different location of the bathroom, which will probably require the services of a professional contractor and/or designer.
What about the Shower Door?
Many DIYers forget about the shower door until it’s too late. To avoid the headache that comes along with that, figure out your shower door situation before you plan the renovation. Ask yourself a few questions: where will you put the door in your new shower? Does it interfere with the bathroom vanity or toilet? Will there be enough room to get in and out of the shower with the new shower door? If the walkway from the vanity or toilet to the shower is too tight for a swinging shower door, there are other alternatives available on the market, including glass block walls, sliding doors, and retainer walls. Tip: if the bathroom floor is going to get wet outside the shower, choose a slip-resistant material for the floor.
Take Your Time with Fixtures
Shopping for bathroom fixtures can actually be a lot of fun, as long as you take your time and do your research. Research your options, and keep an eye out for specials and possible out-of-the-box combos. Many first-time DIYers may feel pressure to purchase all their bathroom fixtures and accessories from the same brand, which isn’t a necessity. In fact, many professional designers mix and match fixtures from a few different companies. Since bathroom fixtures are mostly chosen for their aesthetics, as long as they all look great together they’re fair game. Tip: if you’re building a custom steam shower, it should be constructed by someone with at least five years’ experience with vapor proofing.
Lighting & Tile
The key to a polished-looking shower is to consider your lighting and tile options from the very beginning. Make sure to include lights inside your shower, not just outside or around it. Depending on the size and overall design of your shower, one, two, or four lights might look best. When you remove the tub to make room for the new shower, take the opportunity to make sure the light system you chose can be installed like you had planned. Finally, don’t install the tile until you have the finished light sources already in place. Otherwise, it’s difficult to know how any lippage might look, as the lights of a shower are often quite close to the wall which will showcase any mistakes you made while installing tile.